In this post, I am going through the various fix procedures on the Fios remote not working issue. There are a lot of issues Fios users are arising with Fios remote controls like
- Fios remote Red light blinking
- The Fios remote volume button not working
- Fios voice remote not working
- Fios remote won’t change channels
- Fios Remote control not turn on/Turn off Tv
- Fios remote not responding
One of the common issues with FiOS remote controls is the remote not working and blinking red. Many FiOS users have reported this problem. In this article, I’ll explain the reasons behind these issues and provide solutions to fix them. Additionally, I’ll cover other common FiOS remote control problems, such as the volume button or power button not working.
Is Verizon Fios Remote not working? Common Issues and Fixes
Fix the RED light blinking issue
Many FiOS users report that their remote control blinks a red light up to five times. The most common cause of this issue is low battery charge. When the battery level is too low, the red light blinking occurs on the FiOS remote. The only solution to fix this problem is to replace the remote’s batteries.
If you’re using AA rechargeable batteries, ensure they are fully charged. Rechargeable batteries with a charge level below 20% often cause the red light blinking issue.
To avoid this problem, consider using higher-quality rechargeable batteries for your FiOS remote. Many users experience this issue even when the battery charge is still above 30%. Simply replace the old batteries with fresh ones, and the red light blinking issue should be resolved.
FiOS Remote Volume not working
There are many reasons why the FiOS remote volume may not be working. You’ll need to troubleshoot and make a few adjustments to resolve the issue. I’ve personally experienced this problem with the FiOS remote control and went through a series of steps to see if they helped. After contacting FiOS support, they suggested some tweaks that can solve volume issues with the remote control.
What to do when Fios remote volume not working?
The first thing to check when the FiOS remote volume is not working is whether all the other buttons on your remote are functioning properly. If the other buttons are working fine, there are two possible reasons for the volume button issue:
- The volume button on your FiOS remote may be physically damaged.
- Your FiOS remote may not be paired correctly with your device.
How to reset the FIOS remote
Reset your FiOS remote control by unpairing it and then pairing it again carefully. Before resetting the remote, try removing the batteries and then reinserting them. If that doesn’t work, unpair the remote and pair it again.
Fix Hardware damage
Check if the volume up and down buttons on your FiOS remote are working properly. If only one of them is functioning, there’s a high chance of physical damage, typically due to an issue with the button mat. This problem arises when the circuit board and button mat lose conductivity, preventing proper communication between them.
To fix this, you’ll need to address both the circuit board and the button mat. Start by removing the battery from the remote. Carefully open the back and front panels, then gently separate the button mat from the circuit board. Clean the circuit board and button mat with a soft brush to remove dust buildup.
Focus on cleaning the area around the volume button on the circuit board and apply electric paint to the underside of the button mat where the volume button is located. After the paint dries, carefully reassemble the remote, ensuring all buttons are aligned with the button mat. Test the volume button, and the issue should be resolved.
Program Fios Remote With Right Remote Code
If you’re using a universal remote from a different brand that supports FiOS, you’ll need to program it with the correct FiOS remote code. In some rare cases, when programming a FiOS universal remote, certain functions may not work properly. To resolve this, remove the battery from the remote, reinsert it, and then program the remote with a different code that you haven’t tried before. There are usually multiple codes available for your universal remote.
Check if Your Fios TV or STB working Fine
Before troubleshooting, make sure your FiOS set-top box is working properly. Also, ensure that you’re using the FiOS remote within its maximum distance range. Most remote controls, except for advanced smart remotes, typically work within a range of up to 12 meters. Test the remote within this distance from your FiOS set-top box to ensure proper functionality.
Check all connections on the device
Check all the connections on your FiOS devices, such as the TV, set-top box, and any other connected devices, to ensure they are secure. It’s a good idea to unplug and reconnect them to avoid any connection-related issues. This may help resolve the volume issue with your FiOS remote.
Why is Fios remote not changing channels?
Another serious issue with the FiOS remote control is related to its functionality with your TV, such as not changing channels, not turning the TV on or off, and similar problems. To fix this, check the battery in the remote. If the battery is running low, the FiOS remote won’t work properly and may fail to change channels, turn the TV on or off, and more.
Fios Voice Remote Not working or unresponsive
If you’re using a voice-activated FiOS remote control, the FiOS voice feature may be malfunctioning. Many FiOS users have reported issues with the voice remote not working. The most common solution to fix this is to reset the FiOS voice remote.
How to reset Fios voice remote
- Press menu on your Fios stb
- Then go to settings
- select remote models on your tv screen
- then select the program voice option and then select the reset option and select ok and wait till the reset process completes
- Now test your Fios voice remote control whether it is working or not.
If none of the above-mentioned steps have fixed issues like the FiOS remote volume button problem, red light blinking, or non-responsiveness, you can replace your FiOS remote with the original FiOS remote or any other top FiOS universal remote. There are various FiOS replacement remotes available that do not require any programming.
Read More Posts:-